How to Use

Instructions on how to use LensBoost™ wipes.

Step 2

Tear open the pouch, remove the applicator pad and hold it between your thumb and fingers as shown.


Step 3

Starting from the top and using light pressure, immediately begin to drag the pad across the first headlight from one side to the other, making sure to overlap your previous stroke. Smooth out any bubbles, ridges or missed areas as you work down the headlight.


LensBoost is a coating. You simply use the applicator pad to "paint" it on and let it do the work.

  • Work quickly; product begins to dry once opened.

  • Apply in an enclosed indoor space such as a garage, parking garage or carport; applying LensBoost outdoors may cause undesirable results.

  • To redo your application, wipe off the coating using a wet cloth within 5-10 minutes of applying.

Step 1

Thoroughly wash both headlights with soap and water. Then rinse with water and wipe dry with a clean towel.


Step 4

Flip pad over and repeat for the second headlight.



Allow the lenses to dry for approximately 15 minutes before touching or coming into contact with any moisture.


© 2020 Cerpak Solutions. All rights reserved.