© 2020 Cerpak Solutions. All Rights Reserved.

LENSBOOST FAQ

Find answers to frequently asked questions below.

How long will LensBoost last?

LensBoost lasts up to two years. This will depend on the usage of the vehicle as well as how much sunshine the lenses receive. To extend the life of LensBoost; limit the amount of UV exposure the lenses receive.

Why do I need to apply LensBoost indoors?

Applying LensBoost indoors eliminates outdoor variables such as wind, dust, heat, and humidity. These elements can produce undesirable results such as streaking, sagging or particles embedded within the coating. If you must apply LensBoost outdoors, we recommend a shaded area free from wind and dust. For businesses: We recommend closing the bay door nearest to the car until the application is complete.

Can I apply a second coat?

Absolutely. Applying a second coat once the first application has sufficiently dried will provide a longer-lasting finish. Allow the first coat to dry for approximately 30 minutes before reapplying.

Can I sand the headlights before applying LensBoost?

Although LensBoost was designed to not require sanding, doing so can improve the overall finish.

Can I speed up the drying process?

Typical drying times range from 10 to 15 minutes. However, you can speed this up by using a blow dryer (set to cold) or direct a fan at the lenses (recommended distance: 2 ft.).

What should I do if I get LensBoost on my skin?

We recommend the use of disposable gloves for easy cleanup or for people with sensitive skin.  LensBoost is water-based and non-toxic -- thus gloves are optional. If LensBoost gets on your skin, scrub the area with soap and warm water to remove the coating. 

What happens if I get LensBoost on my car paint?

LensBoost can be wiped off using a wet cloth within 15 minutes of application and picked off safely using your finger within 30 minutes of application.

 

 

Can't find what you're looking for? Ask us directly here.